Ford RS200 Database

Oil pump rotors have been used in a couple of engines for several years, made an improvement but the idle oil light can occasionally be seen after hard or track use, there was an improvement in the volume and pressure as we had to adjust to pressure relief valve from it's original position to reduce...

I am having some parts made. Transfer box gears, helical teeth. 19/22 decrease gearing by 2 mph per 1000 rpm 18/23 decrease gearing by 4 mph per 1000 rpm 22/19 increase gearing by 2 mph per 1000 rpm 24/23 standard road car 23/24 decrease gearing by 1 mph per 1000 rpm 23/18 increase the gearing by 4 ...

Can some one with a car fitted with power steering plesase measure the diameter of the pulley fitted to the high pressure oil pump idealy the root diameter at the bottom of the 'V'. I have a pulley with slots in it but it is from a Group A cosworth and is the wrong diameter even though it fits. Than...

I had header tanks re-made replica of original, for pictures see chassis 86 the evo car which is for sale. Steve Do you still have these.? If so how much.? Yes I Do still have some, price depends if you just want tank and cap or if you also want bracket, clamp and silicone pipe, so anywhere between...

A few questions for owners of EVO or cars/competition cars using the inch and three quarter larger water pipes with the 'pink' silicon/rubber pipes. Firstly the coolant swirl pot, the lower pipe welded to the pot, is it horizontal with an angled silicone/rubber joining piece or is the lower welded p...

I am having some oil pump rotors made for the front mounted pressure oil pump, these will be wider than the originals so the housing will need machining (something I can sort). The rotors will be 30% wider than the originals a modification done to some competition engines, which will cure to low idl...

Parts are form a LHD car.

Steve

I am after some of the alternative transfer gearbox ratios ideally some of the higher ratios, 22 teeth input shaft:19 teeth propshaft (I would be interested in the lower version of 19:22) Also 23 teeth input shaft: 18 teeth propshaft Any others considered, complete boxes or just gears. If you do not...

I had header tanks re-made replica of original, for pictures see chassis 86 the evo car which is for sale.

Steve

I am considering remanufacturing syncro gearbox rings, Is Anybody interested in a few sets as they are a bespoke ring ? Or does anyone have these on the shelf ? The same goes for the dog gearbox rings. Several sets have already been manufactured for the syncro box they were made form a similar mate...