RS200.org site support stickers

[Nikki]

Hello all,

I am thinking of making a small run of stickers to support RS200.org. The plan is to make these available to all site members and also on our Facebook fans page for a small cost. I still have to determine how much exactly they will be but I guess it will depend on the quantity I get made which in turns is driven by how much interest they will get.

This is the project I've come up with so far:


Size will be approximately 15 cm (about 6 in) or slightly smaller for the outline of the car.

It will be the cut out shapes and letters type, not the full rectangle sticker and possibly make them "mirror" like so that they can be placed on the inside of a window to be read the right way around when viewed from the outside (obviously), but I can make both if there is enough interest.

Any feedback welcome...

[sparky]

Love it. I will take a few.

[Nikki]

Thanks for the feedback sparky.

I just updated the image as I thought the .org part was too disconnected from the rest from the logo with the different font. I've now put it in the same font as the "RS200" part. I deliberately kept the .org a bit smaller so as to keep RS200 emphasized.

[John.H]

I will take 10 or so. Mirrored or otherwise, I have no preference.

[lotus2mark]

great idea i will have 10 has well cheers.

[Loaded1001]

Yep, me too.

[Nikki]

Thanks for your interest so far everyone.

Ok one small change... It looks like I will have these made on transparent vinyl with 2-colour printout instead of individually cut-out letters... The 2-colour requirement seemed to pose an issue for individually cut out letters and also the vinyl printouts will cost a lot less. The shape of the vinyl will still be cut to match the outline of the visible items (i.e. the car at the top part and around the letters on the lower part, +1mm border all around.

Cost will be 6 GBP per sticker not including postage. I know it seems a lot for a single sticker but this is inevitable with relatively low quantities and at the moment I don't want to produce a huge amount to begin with as I don't want to end up with unsold items. For information at the moment I have placed an order for 100 stickers (total of 4 versions).

This picture shows the 4 versions I will have available (the mirrored ones are to go inside windows):


This image shows the cutout shape (the pink line) of the vinyl:


I will put ordering instructions up as soon as they have been printed (and passed quality control - i.e. I'm happy with them).

Comments and/or suggestions welcome if you have any.

Thanks,
Klaus

[Mike 2]

Hi Klaus

I have been away for a couple of weeks and just returned,

Great idea,

I will take 10 stickers when there ready.

Thanks
Mike

[Nikki]

Thanks Mike for the interest. They should be ready within a week hopefully.

[Justin Smith]

Klaus - I LOVE the idea, they look great - put me down for 5