Ford RS200 Database

Hi All
We have borrowed a light pod mould to make the light pods,and have a T bar to take a mould off.We only have the light pod mould for 4 weeks,we are asking who would be intrested in the pod and T bar,so we can get a price from the guy who will make them the more we buy the cheaper the cost
Jim

I forgot, does any body know where we can get the Hella lights, and the looms made up
Jim

The original light units are Hella Rallye 2000. The drive lights are not so difficult to find on ebay (second hand) but the spots are quite difficult to find. Both are I believe still available new from Hella Australia, although the spots (pencil beams) are the later style lens pattern which is slightly different to that fitted to the RS200. These were fitted into custom spun alloy mounts in the original pods.

I would be interested in a T bar.

William (096)

Hi Jim, are you talking about the front grill piece on the works cars when you say "T" bar ?
If so I will have 1 for sure and maybe more depending on price.

Regards.....Lyle

How much would a pod cost Jim?

Hi Jim,

Count me in for a T-bar if its the 'works' type bumper infill piece.

Cheers, Steve.

I would be interested in both bits, depending on price.

Regards,
Stuart

deffo up for a pod!

are the lamp holes pre cut or is it a flat face that needs cutting? (not really fussed either way jst curious

price dependent - very interested

andy

As requested by Jim I have added a photo to clarify the T-bar item. It is indeed the bar that goes across the front bumper on the works cars, as visible in the picture added to Jim's original post at the beginning of the thread.

Hi All
Iam getting a price for 6 off each,they will be offered to the guys who have registered intrest first,we will then return the moulds, there will be no more made from these moulds
I should know over the next few days
Jim